HDP3000浓相正压输送概念
HDP3000传统概念浓相/密相正压系统是浓相、中高压力、中低速度、批量传输系统。一般用于传输几乎任何粒度的中高密度、热敏感性、半磨蚀性和／或高磨蚀性、粘结性和／或高脆性物料。例如硅砂、玻璃配料、砂糖、糖粉、塑料粒、膨润土、水泥、淀粉、石英粉、球土、高岭土、氧化锌与矾土。
典型传输速度约为0.5-5米／秒，传输压力可达7barg。
此概念输送管线的加料需要一个以最高密度加料的非流化型的压力容器，并且使用DC-5节气技术降低及优化输送管道，由高压空气压缩机提供最高7barg压力的高压空气。
服务热线:021-64325188
The HDP 3000 Conventional Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity batch type conveying system.
It is generally used for conveying high to medium density, heat sensitive, semi-abrasive and/or very abrasive, cohesive and/or very fragile materials in almost any particle size range. Examples include silica sand, glass batch, granulated sugar, powdered sugar, plastic pellets, bentonite, cement, starch, silica flour, ball clay, kaolin clay, zinc oxide and alumina.
Typical conveying velocities are generally in the range of 100 to 1000 feet per minute (0.5 m to 5 m/sec) and the conveying pressure up to 100 PSIG (7 barg) pressure.
This concept uses a non-fluidizing type pressure vessel to feed material into the conveying line at maximum density and utilizes DC-5 Air Saver technology to minimize and optimize the high pressure air which is supplied by a high pressure – up to 100 PSIG (7 barg) air compressor.
详细介绍及手册下载请参阅总部网站：http://www.dynamicair.com